Filters can become clogged when they collect debris. Filters can become inefficient or completely useless due to this. One reason for this is that certain types of filters, especially carbon-based ones, eventually lose their adsorptive qualities.
The cartridges and filters should be changed on a regular basis. The frequency and time required to replace filters will vary depending on how often they are used and the “service cycle.” However, it is safe to replace them every 12 months to ensure your safety.
If your filter has been in service for more than a year, you should consider replacing it. You can ensure the highest level of home water treatment system effectiveness by doing this.
While many filters may look identical, sizes and makes can vary greatly from one unit to another. It could be because of the different purposes and manufacturers of filters. You could also think that some filters have more recent versions and are better aligned with the latest standards.
Whatever the situation, it is crucial to choose the correct size and type filter. Because even the smallest differences can render the entire system useless. A slightly smaller filter, for example, will allow contaminants to pass through the filter instead of around it. The contaminants will still end up in your water, however.
Filter cartridges must be manufactured according to the manufacturer’s specifications. These specifications and instructions are well-known to professional technicians. They will determine the type of cartridges they have and then locate the parts.
What Cartridges Should You Replace And How Often?
A reverse osmosis water filter system often has more than one processor filter. Our 5-stage reverse osmosis water filter system includes the following filters:
- Sediment pre-filter
- Granular Activated Carbon filter (GAC).
- Ultrafine membrane for reverse osmosis
- Filter for prolonged contact time (PCT).
- Post filter carbon polishing
Each has a specific purpose. The sediment prefilter removes the dirt and other debris (the “big guys”). The GAC filter removes chlorine. The RO membrane is the third filter. This is where the majority of contaminants are removed. The PCT filter removes small particles. The carbon polishing post-filter adds freshness to the water.
All filters, except the RO membrane, may need to be changed every 12 months. Filters don’t allow contaminants through. These substances and objects may eventually build up and make filters less effective.
Minerals can build up and block pores in the filters. The activated carbon filter may eventually lose its ability to adsorb chlorine or other particles. It is important to replace filters frequently in order to maintain the effectiveness and efficiency of a filtration system.
How Can I Make Sure Filters Are Replaced Promptly?
It’s easy to forget when the cartridges last changed. Many homeowners request scheduled maintenance for their filtration system. A reminder will be sent by the company responsible for the maintenance a few days prior to the scheduled maintenance. They will replace the filters and conduct pressure and flow test when the time comes.
Clean & Clear Purification Specialists can service any existing unit, even if it was installed by another company. Our technicians are experienced in installing, repairing, and maintaining different types of water filters for commercial and residential homes.
What Is The Cost Of A Cartridge Replacement?
The filter cartridges as well as the labor will be charged to your account. This is a fast job, so you can expect to pay minimal labor costs. Filter cartridges, on the other side, are more expensive. You might need to change 5 filters at once, as we discussed previously. Each one will increase the cost.
This is a relatively small investment when compared to the guarantee of safe and clean water. The RO filters are there to protect you and your family. It is important to ensure that your filters work perfectly and are in top condition.
This post was written by a water treatment expert at Paragon Water Systems. At Paragon Water Systems we are the Manufacturers of the best Carbon Block Water Filter! We know that the best product comes from the best materials. We manufacture home water solutions such as reverse osmosis systems, under sink water filtration systems, showerhead filtration systems, carbon cartridges, and a wide variety of other products. Our focus is to provide Americans with safe and clean water throughout the home.
Comments are closed.